Bandit VXL RTR TQi 2.4GHz/TSM C.Force Edition

1/10 Scale, 2.4GHz Radio Controlled, Ready-to-Run Traxxas Bandit VXL Brushless Motor Powered Off-Road Buggy  with Traxxas Stability Management.

FEATURES:

• Traxxas Stability Management (TSM): Superior tuning algorithms run on
  high-speed electronic components to control wheel spin and steering
  direction on loose dirt, concrete and even ice and snow. TSM can be
  fine tuned or turned off by adjusting the multi-function knob on
  the TQi transmitter or the slider in the Traxxas Link app
• Chassis: Fiber composite bathtub style .15″ (4mm) thick
• Drive: Rear wheel drive
• Motor: Traxxas Velineon 3500 brushless
• Radio: Traxxas TQi 2.4GHz Direct Sequence Spread Spectrum (DSSS)
  programmable system with Traxxas Link automatic model recognition
  that allows up to 20 Traxxas Link receivers and transmitters to be
  bound, transmitter automatically recalls settings for any
  previously bound receiver
• Speed Control: Traxxas Velineon VXL-3s Forward/Reverse/Brake
• Battery: 8.4V 7-cell NiMH 3000mAh Traxxas Power Cell
• Battery Charger: 4A DC powered
• Shocks: Ultra Shocks with powder coated White springs
• Gearbox: Sealed
• Differentials: Planetary gear type with hardened steel gears
• Transmission: Three gear variable ratio with sealed ball bearings and
  telescoping driveshafts
• Slipper Clutch: Revo Spec Torque-Control-adjustable to provide
  consistent traction control
• Tires: Alias 2.2 racing tires, stepped pin rear and ribbed front
• Wheels: 2.2″ (56mm) Black Chrome finish Tracer 5-spoke
• Body: Traxxas ProGraphix painted body with wing
• Bumpers: Front, Black plastic
• Suspension: Live axle front with centered kingpin
• Camber Tie Rods: Fixed non-adjustable
• Steering Tie Rods: Adjustable with Jato style steel turnbuckles and
  heavy duty rod ends
• Steering: Bell-crank with laydown servo placement and servo saver
  new design front steering spindles with 5x11mm rubber sealed
  bearings

INCLUDES:

Traxxas Bandit VXL, Velineon Brushless motor, Velineon VXL-3s ESC,
26 tooth pinion gear, Black-Chrome tracer 2.2″ wheels, radio,
76 spur gear, instructions, wrenches, aftermarket servo adapters,
pre-load spacers & shock pistons, battery pad, replacement screws,
body clips and washers, 7-cell battery, DC charger, Traxxas
Stability Management

REQUIRES:

AA Batteries: Four for transmitter
Misc. Items: Building and track equipment

SPECS:

VEHICLE-
Length: 16.26″ (413mm)
Width: 10.25 (260mm)
Height: 7.3″ (186mm)
Weight: 3.0″ (1380g) with body
Wheelbase: 11.58″ (294mm)
Tread: Front- 9.1″ (232mm) Rear- 8.25″ (209mm) side-to-side at wheel
centers
Front Track: 10.16″ (258mm)
Rear Track: 9.92″ (252mm)
Ground Clearance: 1″ (25mm)
BODY-
Length: 14.75″ (375mm)
Width: 5.4″ (138mm) at rear wheels (widest point)
1.5″ (39mm) behind from wheels (thinnest point)
Height: 3.7″ (95mm)