• R/C Madness
  • Products
  • Electronics
  • Chargers
  • Junsi iChargers
  • Junsi iCharger X8 Lilo/LiPo/Life/NiMH/NiCD DC Battery Charger (8S/30A/1100W)
  • Junsi iCharger X8 Lilo/LiPo/Life/NiMH/NiCD DC Battery Charger (8S/30A/1100W)


    Out of stock

    Be notified when this product is back in stock!

    SKU: junx8 Categories: ,
    Share this product

    Junsi iCharger X8 LiloLiPoLifeNiMHNiCD DC Battery Charger (8S30A1100W)


    • X8 uses advanced Synchronous buck-boost DC/DC converter technology with high power, high current and high-performance power conversion circuit. The maximum charge power capacity is up to 1100W, the maximum charge/discharge current of a channel is up to 30A.
    • X8 Supports 8s LiPo, Lilo, LiFe, LiHV, LTO and NiZn batteries, with maximum 2A balance current, and adopts a unique balance calculation of internal resistance correction. Supports 1-25s NiMH/NiCd batteries and 1-15s Pb batteries.
    • With digital-power mode for great protection (over-current protection, over-voltage protection, input under-voltage protection, input undercurrent protection, and etc.)
    • Intelligent fan control. Sensing internal temperature via the internal temperature sensor, to thereby control the fan speed.
    • Internal temperature protection. When the internal temperature exceeds the Power Reduce temperature, the output power is automatically reduced; and the charger will shut down when temperature exceeds the Shut-down temperature.
    • This charger can save 32 parameters sets and support the data import/export to SD card.
    • A 2.4″ IPS LCD screen provides rich information including current, voltage, power, capacity, internal resistance, control status, time-consuming and temperature, etc.
    • Multi-discharge features: self-discharge, regenerative to input discharge, and lithium battery extra expanding discharge.
    • Supports measurement for internal resistance of battery offline and online. Can measure not only the internal resistance of the entire battery pack, but also measure the internal resistance of each cell within the lithium battery.
    • X8 has protection for reversed polarity (input or output), input voltage/current, battery temperature, charging capacity, overrun time and maximum power etc.
    • Supports upgrading the hardware program by USB port or SD card. X8 also supports the “Junsi Console” software and can display, plot and analyze the charge and discharge data by it.

    2.4 ” IPS LCD (320×240)
    Net weight: 
    Dimension: 97.5×64.5×37 ±0.5mm
    Input voltage range: 9—49VDC
    Maximum input current limit: <35A
    Maximum charge/discharge current: 30A
    Maximum charge power capacity: 1100W
    Maximum discharge power capacity: 50W
    Maximum regenerative discharge power capacity: 1100W
    Maximum extra discharge power capacity: 1000W @33.5V/30A
    Maximum current drain for balancing: >2.0A

    Weight25 lbs