KR8000 EB48.4 1/8 Competition Electric Buggy Kit

Rated 5.00 out of 5 based on 2 customer ratings
(2 customer reviews)

$549.99

3 in stock

SKU: TKR8000 Category:

Description

KR8000 EB48.4 1/8 Competition Electric Buggy Kit

1/8 scale Electric Powered, Radio Controlled EB48.4 Competition Buggy Kit.

FEATURES:

  • Chassis: 7075 aluminum 0.16″ (4mm) thick
  • Drive: Four wheel, front and rear universal driveshafts, tapered
    aluminum center driveshaft
  • Differentials: Three fluid filled adjustable
  • Shocks: Oil-filled with CNC machined aluminum bleeder shock caps
    that can be used to build vented or non-vented shocks (optional
    bladders required for non-vented shocks), 4mm steel shafts,
    CNC 4×1.9 Flat/Flat Delrin Pistons, and CNC Delrin Guides, new low
    frequency shock springs, tall clamping spring perches with
    captured shock boots
  • Steering: Revised geometry and Ackermann plate, response and
    durability improved with new bearing supported spindles and spindle
    carriers, reduced wheel offset for better performance in corners
    adjustable Ackermann and bump-steer, Ackermann refers to the effect
    of the inner front wheel rotating faster that the outer front wheel
    during turns, optional solid right bell crank for increased
    response
  • Body: Clear polycarbonate, fighter jet inspired with more internal
    clearance, small rear spoilers increase downforce, with with
    adjustable low center of gravity lightweight mount
  • Suspension: Revised wide rear pivot suspension geometry
  • Motor Mount: 2-piece CNC aluminum with dual clamping gear mesh
    adjustment, direct-to-diff mounting
  • Caster: Adjustable, caster/toe-in refers to the angle of the front
    suspension when viewed from the side of the car in relation to
    the chassis
  • Camber: Adjustable front and rear, camber refers to the angle of the
    tops of the tires from vertical when viewed from front or behind
    vehicle

INCLUDES:

EB48.4 Competition Buggy Kit with Clear Body, Shocks, Decals, Window
Mask Sheet, Rear Wing, Shock and Diff Oil, Instruction Manual

REQUIRES:

Radio: 2-channel with high-torque steering servo
Motor and ESC System: For 1/8 scale buggy
Tires and Wheels: For 1/8 scale buggy
Pinion Gear: MOD1 15-25 tooth pinion (TKR4175-TKR4185)
LiPo Battery: 4-6S (4S at least 5000mAh)
Battery Charger, Charging Bag, Paint, CA Glue, tools, building and
track equipment

SPECS:

Vehicle-
Length: 17.1″ (435mm) without wing
Width: 12 – 12.2″* (306-310mm*) *optional hubs required
Weight: 7.0lbs (3200g)
Internal Gear Ratio: 3.33:1
Diff Ratio: F/R – 12/40t, center 44t
Battery Tray Dimensions: 1.97×5.8″ (50x148mm) 2x2s or 1x4s config
Body-
Length: 13.3″ (338mm)
Width: 5″ (127mm)
Height: 3.5″ (89mm)

Additional information

Weight 15 lbs

2 reviews for KR8000 EB48.4 1/8 Competition Electric Buggy Kit

  1. Rated 5 out of 5

    The progression from the EB48 to the EB48.3 evolved through many significant changes, industry firsts, and also hundreds of fine adjustments. With the introduction of the EB48.4, we have once again raised the bar and improved on nearly every aspect of the buggy. This time it took the form of many fine adjustments, but the leap in performance is our most significant yet. Ask Zach or I for a test drive if you see us at the track we will try to make that happen.

  2. Rated 5 out of 5

    Five star

Add a review