X2 AC Pro 2 Port AC/DC Multi-Charger


Out of stock

SKU: HRC44238 Category:


X2 AC Pro 2 Port AC/DC Multi-Charger

Hitec X2 AC Pro AC/DC Multi Charger and Built-In Soldering Station


  • Charges 1-6 cell LiPo, LiHV, Li-Ion and LiFe batteries
  • 1-15 cell NiCd, NiMH batteries
  • 2-20V lead acid batteries
  • Charges two different types of batteries simultaneously
  • 60W max, 400-840°F soldering iron with two tips, stand and sponge
  • 128×64 LCD screen
  • USB port for PC control and firmware upgrade
  • Smart phone control and monitor via WiFi module (requires WiFi
  • Module, not included, order HRCP4228)
  • LiPo battery meter
  • Battery internal resistance meter
  • Capacity limit
  • Processing time limit
  • Ten battery memory
  • Charge Master software allows monitoring pack voltage, cell voltage
    and other data via personal computer, as well as initiating and
    updating firmware
  • Re-peak mode for NiMH/NiCd batteries ensures full charges
  • Delta peak sensitivity terminates charge when battery voltage
    exceeds threshold
  • One year limited warranty from the date of purchase through HITEC


X2 AC Pro Charger
AC Power Cord
Universal Balancing Board
XH Balancing Board
Two Charging Cables
2-pin T-Type Charge Lead
XT60 Charge Lead
Soldering Iron w/Pencil and Chisel Tips, Stand and Sponge
Instruction Manual


AC Input: 100 – 240V AC
DC Input: 11 – 20V DC
Total Charge Circuit Power: 200W AC input (Support Power Dist.)
channel A 200W, channel B 100W DC Input
Charge Current Range: Channel A 0.1-20A/channel B 0.1-10A
Discharge Current Range: 0.1 – 5.0A x 2
Discharge Circuit Power: 10Wx2
Current Drain for LiPo Balancing: 300mA per cell
Capacity Range: 100-50,000mAh
Dimensions: 7.76 x 7.17 x 2.80″ (197 x 182 x 71mm)
Soldering Iron: 60W max 392°F – 842°F
60W max 200°C – 450°C

Additional information

Weight 2 lbs


There are no reviews yet.

Be the first to review “X2 AC Pro 2 Port AC/DC Multi-Charger”